 |
|
TRI WORK UNIT :
Art. 9042
Suitable for both small and large quantities.Extremely easy to use and very fast.
Punching, bending and cutting copper bus-bar and din-rails.
CHARACTERISTICS:
Power: 200 kN
Max. work pressure :700 Bar.
Adjustable stroke: 50 mm.
Amount of oil required for full stroke: 0,180
lt.
Length: 850 mm.
Width: 600 mm.
Height: 500 mm.
Weight: 90 kg
Supplied with 1 mt ruler and protection carter.
|
Bends, cuts and punches copper bars, aluminium bars etc. with a maximun thickness of 15 mm and with a maximun width of 160 mm.
In order to achieve the maximun working precision, as well as to save time, the tooling is mounted on a work bench which has been designed specially to be rational and pratical in operation.
 |
SWIVEL TRIS WORK UNIT :
Art. 9042/AL |
|
|
Sample of
working :
 |
|
TRIS WOK UNIT 30 TON. Art. 9046
Punches bars up to 15 mm. thickness, Cuts bars up to 160x15 mm., Bends bars up to 200x20 mm.
CHARACTERISTICS:
Power: 300 kN
Max. work pressure: 700 bar
Adjustable stroke: 65 mm.
Amount of required for full stroke:: 0,300 litres |
 |
BAR CUTTER |
 |
BAR BENDER |
|
|
|
ROUND PUNCHES
These sets consist of a male punch and female die on which the diameter is stamped to avoid fitting errors.
Punch extraction is automatic by means of special springs. |
 |
OVAL PUNCHES
These sets have the same characteristics as those of the round punches and in addition are fitted with a positioning guide to avoid assembly errors. |
|
 |
PUNCHING CYLINDER
Art. 9023
:
It is particularly handy and convenient and permits the punching of flat and angular bars in any position.
It is especially used for connections in trasformer cabinets and for electrical switchboards.
|
| |
 |
|
SPECIAL TOOL FOR CUTTING FLEXIBE
BUS-BAR Art. 9158:
It can be used on all Tris Units of series.
It cuts flexible bus-bar 100x10 mm.
Easy to use, as the other tools of series.
|
 |
PUNCHING CYLINDER
Art 9020:
for packs of flexibe copper bars.
|
 |
|
The following TRIS UNITS are available:
| 9042 |
Tris work unit |
| 9042AL |
Sviwel tris work unit |
| 9044 |
Coupled tris cylinders |
| 9045 |
Tris work unit with horizontally fixed position |
| 9045V |
Vertical Tris work unit |
| 9046 |
Tris work unit 30 TON. |
|
|
• Portable Tools
• Hydraulic Punching Machines
• Working copper bars
• Punching Cyliders for Channels, Wire Gangway and Boxes
• Cutting and Punching DIN rails
• Cable terminal Crimping Cylinders
• Cable Cutting Shears
• Pumps and Control Units
|
|
